Installation guide

Crestron DIN-8SW8-I DIN Rail High-Voltage Switch
Connectors, Controls, & Indicators (Continued)
# CONNECTORS*,
CONTROLS & INDICATORS
DESCRIPTION
2 NET
(2) 4-pin 3.5 mm detachable
terminal blocks, paralleled Cresnet
slave port
Connects to Cresnet control
network.
Maximum wire size: 1.5 mm
2
(16 AWG)
24: Power (24 Volts DC)
Y: Data
Z: Data
G: Ground
3 NET ID
DISPLAY and CONTROL
(2) 7-Segment green LED digits
and (2) miniature pushbuttons for
setting Cresnet ID and indicating
errors
4 INPUTS
(9) 3.5 mm detachable terminal
blocks;
Isolated low voltage digital inputs
allow standard momentary
switches to trigger relay events
5 SETUP
(LED and BUTTON)
(1) Red LED and (1) recessed
miniature pushbutton for enabling
setup mode and touch-settable ID
(Continued on following page)
Operations & Installation Guide – DOC. 6930A DIN Rail High-Voltage Switch: DIN-8SW8-I • 9