Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Operations and Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2005 Crestron Electronics, Inc.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Contents Docking Assembly for STX-1700CW/CXPW: DA-1700CW 1 Introduction ............................................................................................................................... 1 Functions and Features ................................................................................................ 1 Specifications ..............................................................................................................
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Docking Assembly for STX-1700CW/CXPW: DA-1700CW Introduction Functions and Features The DA-1700CW docking assembly is wall-mounted hardware that is used to dock a Crestron STX-1700CW or STX-1700CXPW color touchpanel.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW Specifications The table below provides a summary of specifications for the DA-1700CW. Specifications of the DA-1700CW SPECIFICATION DETAILS Cresnet Power Usage Default Network ID Control System Update Files 2-Series Control System CEN/CN-TVAV CNMSX-AV/PRO CNRACKX/-DP ST-CP Dimensions and Weight 16 Watts (0.67 Amps @ 24 VDC) 51 1 2,3,4 Version C2-2004.CUZ or later Version 5.10.13V.UPZ or later Version 5.10.11X.UPZ or later Version 5.10.11W.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW DA-1700CW Physical View Manual Release DA-1700CW Dimensions 5.57 in (14.14 cm) 3.56 in (9.05 cm) 6.51 in (16.54 cm) Operations and Installation Guide - DOC.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW Front View Components TOUCHPANEL LATCHING HOOKS ELECTRICAL CONTACTS (CRESNET Y DATA & Z DATA) ELECTRICAL CONTACTS (OPERATING & RECHARGE POWER) Side View (with Partial Cut-Away) Components MANUAL UNLATCH TAB LATCHING LEVER & HOOKS UNLATCH SOLENOID SOLENOID ELECTRICAL CONNECTORS Rear View Components LATCH RETURN SPRING UNLATCH LEVER CRESNET CONNECTOR 4 • Docking Assembly for STX-1700CW/CXPW: DA-1700CW Operations and Installation Guide - DOC.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Industry Compliance As of the date of manufacture, this unit has been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW Wire Gauge Values RESISTANCE (R) WIRE GAUGE 4 16 6 18 10 20 15 22 13 Doubled CAT5 8.7 Tripled CAT5 NOTE: All Cresnet wiring must consist of two twisted-pairs. One twisted pair is the +24V conductor and the GND conductor and the other twisted pair is the Y conductor and the Z conductor. NOTE: When daisy-chaining Cresnet units, strip the ends of the wires carefully to avoid nicking the conductors.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW 6. Click the Set ID button to initiate the change. This should display the confirmation message, “ID command has been sent”. 7. In the "Command Complete" window, click OK. 8. In the Current Network Devices text window, verify the new Net ID code. 9. In the "Set Network ID" window, click Close. NOTE: The new Net ID code may also be verified by selecting Diagnostic | Report Network Devices in the Viewport (alternately, select F4). 10.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW Install DA-1700CW 3. As shown in the following illustration, position the front panel to the DA-1700CW. Install four hex screws (supplied) to finger-tight then, using a 5/64-inch hex wrench, tighten an additional 1/8-turn. Install Front Panel 8 • Docking Assembly for STX-1700CW/CXPW: DA-1700CW Operations and Installation Guide - DOC.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW 4. As shown below, install the access hole plug into the access hole. Install Access Hole Plug Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com/.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW Programming with SIMPL Windows NOTE: The following are acceptable file extensions for programs that include a DA-1700CW, developed for specific control system types: .smw projectname.smw (source file) .spz projectname.spz (compiled file for 2-series) .bin projectname.bin (compiled file for CNX generation) .csz projectname.csz (compiled file for CNX generation with SIMPL+) .ush projectname.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW C2Net-Device Slot in Configuration Manager The C2Net-Device Slot can accept a DA-1700CW. Once a DA-1700CW is configured in a C2Net-Device Slot, the slot allows Cresnet communication between the DA-1700CW and the control system. NOTE: Refer to the appropriate touchpanel manual for information on developing a program that includes a touchpanel to be docked in the docking station.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW exists in the program. Always ensure that the network device Net IDs set via Viewport match the ones in your SIMPL Windows program. BB/DA-1700CW Symbol in Programming Manager Programming Manager is where programmers “program” a Crestron control system by assigning signals to symbols. The graphic below shows the BB/DA-1700CW symbol in the Detail View of the Programming Manager.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Example Program An example program for the DA-1700CW is available from the Example Program section of the Crestron website (http://www.crestron.com/exampleprograms). Search for DA-1550CW_DA-1700CW Example Program (ZIP). Operation The DA-1700CW docks the touchpanel, provides power and communication, and recharges the ST-BTPN.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW Dock Touchpanel Undocking the Touchpanel During normal operation, the DA-1700CW unlatches the touchpanel electrically via the control system program. When the touchpanel is unlatched, it snaps outward slightly, and then may be removed by hand. The control system program defines the method (i.e., touchpanel button) of unlatching. Electrical Undocking of Touchpanel 1. Via the touchpanel and/or control system program, unlatch the touchpanel. 2.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW 1. Refer to the diagram below. At top-center of the front panel, remove the manual unlatch access plug from the access hole. Remove Access Hole Plug 2. As shown below, insert a long-reach screwdriver into the access hole at a downward angle (approximately 10o) until the tip of the screwdriver contacts the manual unlatch tab. Insert Screwdriver 3.
Docking Assembly for STX-1700CW/CXPW 4. Crestron DA-1700CW Refer to the diagram below. By hand, undock the touchpanel by pulling the upper edge of the touchpanel outward and remove the touchpanel. Remove Touchpanel 5. Refer to the diagram below. Re-install the access hole plug into the access hole. Re-Install Access Hole Plug Problem Solving Troubleshooting The table below and continued on the next page provides corrective action for possible trouble situations.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW DA-1700CW Troubleshooting (continued) TROUBLE POSSIBLE CAUSE(S) CORRECTIVE ACTION The DA-1700CW does not unlatch the touchpanel (continued). The BB/DA-1700CW Net From the Viewport (in SIMPL Windows or VT ID does not match the Net Pro-e), verify that Net IDs match. ID set in the SIMPL program. The touchpanel does not dock in the DA-1700CW. The BB/DA-1700CW in the SIMPL Windows program is not properly configured.
Docking Assembly for STX-1700CW/CXPW Crestron DA-1700CW Further Inquiries If you cannot locate specific information or have questions after reviewing this guide, please take advantage of Crestron's award winning customer service team by calling the Crestron corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. For assistance in your local time zone, refer to the Crestron website (http://www.crestron.com/) for a listing of Crestron worldwide offices.
Crestron DA-1700CW Docking Assembly for STX-1700CW/CXPW Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations and Installation Guide – DOC. 6104A 03.05 (2002117) Specifications subject to change without notice.
