Specifications

Software Crestron SIMPL Windows
Oscillator Example: blinking feedback
press245
press246
fb245
fb246
Touchpanel
out
out*
set
reset
Set/Reset Latch
trig
reset
out
pulse_time 15s
One Shot
trig
reset
out
pulse_time 15s
One Shot
in1
in2
out
OR
gate out
hi_time 0.25s
lo_time 0.25s
Oscillator
in1
in2
out
Exclusive OR
in1
in2
out
Exclusive OR
Screen_up_fb
Screen_down_fb
Screen_up
Screen_down
In order to indicate to the user that a certain event is processing, you can use an
Oscillator to cause a button’s feedback to blink. For example, when the user presses
the ‘Screen down’ button, instead of simply latching the feedback high with a
symbol like an SR Latch, you could blink the feedback until the screen was all the
way up (or down) and then keep the feedback solid. The program in the figure above
accomplishes this.
56 • Crestron SIMPL Windows Primer – DOC. 6253