Specifications

Touchpanels Crestron CT-1000 & LC-1000
2 • Series 1000 Wall-Mounted Touchpanels Operations Guide – DOC. 5813B
Model Differences
There are two Series 1000 models available and selection depends whether grayscale
or color touchscreen is required. Grayscale panels are referred to as the LC-1000 and
color panels are known as CT-1000. Other differences between the two models are
listed in the table after this paragraph.
Series 1000 Touchpanel Model Differences
FEATURE LC-1000 CT-1000
Display Type Four Shades of Grayscale 4,096 Colors
Screen Illumination White LED Backlight Fluorescent Backlight
Power Requirements 3 W, 24 VDC, 125 mA 6 W, 24 VDC, 250 mA
Light Sensor Inversion and/or Backlight Dimming Backlight Dimming
Specifications
The table below and on the next page provides a summary of specifications for the
Series 1000 touchpanel.
Specifications for Series 1000 Touchpanel
SPECIFICATION DETAILS
Power Requirements
3 Watts (24 VDC @ 125 mA) - LC-1000 only
6 Watts (24 VDC @ 250 mA) - CT-1000 only
Default NET ID
3
Default Timeout
10 minutes
Signal Join Maximums
999 digital, 255 analog, 127 serial
Control System Update Files
1,2,3
2-Series Control System Version C2-2004.CUZ or later
CEN/CN-TVAV Version 5.10.13V.UPZ or later
CNMSX-AV/PRO Version 5.07.05X.UPZ or later
CNRACKX/-DP Version 5.07.06W.UPZ or later
ST-CP Version 4.00.49S.UPZ or later
Acceptable File Extensions
4
SIMPL Windows
.smw
projectname
.smw (source file)
.spz
projectname
.spz (compiled file for 2-Series)
.bin
projectname
.bin (compiled file for CNX generation)
.csz
projectname
.csz
(compiled file for CNX generation with SIMPL+)
VT Pro-e
.vtp
projectname
.vtp (source file)
.hex
projectname
.hex (compiled file)
Firmware
.csf
FWxxxxxx.csf (panel firmware)
Audio Capacity
Approximately 90 seconds of total time
5
Audio Output
0.5 Watts
Memory
768 Kbyte flash memory
available for user project and WAV files
6
Visible Touchscreen Dimensions
3.8" (9.6 cm) diagonal