Specifications

Touchpanels Crestron CT-1000 & LC-1000
28 • Series 1000 Wall-Mounted Touchpanels Operations Guide – DOC. 5813B
“Send Program” Window
4. To verify that the program has been transferred successfully, select
Diagnostics | Report Program Information. This should display a
window that provides details about the current program loaded into the
control system.
Uploading a VT Pro-e Project
The Series 1000 touchpanel
source file has the extension
.vtp. A compiled VT Pro-e file
has the extension .hex.
The VT Pro-e file can be uploaded to the touchpanel using VT Pro-e or via the
Crestron Viewport. Verify the NET ID before sending the program.
Upload via VT Pro-e
1. Start VT Pro-e.
2. Select File | Open | Project to view the “Open” window, navigate to the
VT Pro-e file (.vtp), and click Open.
3. Select File | Upload Project.
Upload via Crestron Viewport
1. Verify that the procedure for “Communication Settings” that begins on
page 25 has been performed.
2. As shown after this step, select File Transfer | Send Touchpanel
(alternatively, press Alt+T) from the Viewport menu.