Specifications

Crestron CT-1000 & LC-1000 Touchpanels
Operations Guide – DOC. 5813B Series 1000 Wall-Mounted Touchpanels • 11
Hardware Connection for the Series 1000 (Back of the Unit is Shown)
CONNECTS
TO
CONTROL
SYSTEM
ZAxxxxx
C000000
ELECTRONICS, INC.
ROCKLEIGH, NJ 07647
U.S.A.
CT-1000
Mounting Options
The Series 1000 touchpanel installs simply and cleanly into existing or newly
constructed walls, with an assortment of pre- and post-construction mounting
options. All mounting options are provided separately from the actual touchpanel.
Refer to the table after this paragraph for a complete list of mounting options and
respective Installation Guides for the Series 1000 touchpanels.
Mounting Options for the Series 1000 Touchpanels
PRE-CONSTRUCTION
*
OPTION
POST-CONSTRUCTION
**
OPTION
MODEL
NUMBER
DOCUMENT
NUMBER
Back Box Kit - BB-1000L 6060
Pre-Construction Mount Kit - PMK-1000L 6061
Mud Mount Kit (accessory) - MMK-1000L 6062
Trim Mount Kit (accessory) - TMK-1000L 6063
- Wall Mount Kit - Mud WMKM-1000L 6062
- Wall Mount Kit - Trim WMKT-1000L 6063
-
Water Resistant Cove
r
***
CT/LC-WPK 5932
* Pre-construction refers to framed walls prior to hanging drywall.
** Post-construction refers to framed walls with drywall hung.
*** Cover can be placed over installed touchpanel.
NOTE: Early production units ship with two mounting brackets (and other parts)
that allowed the low-voltage touchpanel to be installed directly into a mounting
surface. If these parts are supplied with the touchpanel and a direct mounting option
is preferred, refer to “Appendix: Early Production Units” on page 34.
If the BB-1000L or PMK-1000L are to be used and a touchpanel is not available, the
installer can either leave the hole in the mounting surface open (if permitted by local
building codes) or attach the cover plate supplied with these two mounting options.
Touchpanel Mounting
Required Tools
 #1 Phillips tip screwdriver