Specifications

Power Supply for Crestron Shade Motors Crestron CSA-PWS10S-HUB
CSA-PWS10S-HUB-CAEN-1X1 Overall Dimensions (Front View, Cover Removed)
2 1/4 in
(58 mm)
10 7/8 in
(276 mm)
10 15/16 in
(277 mm)
(4x) Ø 1 3/8 in
(35 mm)
Mounting Boss
Barcode Label for
Entire Assembly
Barcode Label for
Power Supply
(4x) 7/16 in
(12 mm)
(4x) Ø5/8 in
(16 mm)
(4x) Ø~5/16 in (8 mm) Mounting Holes
for #8 Wood Screws and #8 Large
Flat Washers (Not Supplied)
Cresnet connectors
are included.
Cable Tie
Anchors
2 3/4 in
(70 mm)
9 7/8 in
(251 mm)
I.T.E
POW ER SUPPLY
41JC
ASSEMBLED IN COO
CSA-PWS10S-HUB- CAE N-1X 1
PN 6506320
SNXXXXX
000 00
INPUT: 120-240V~, 50/60 Hz, 5A MAX.
OUTP UT: 24V , 350WCON TINU OUS,
425W 2MIN. ON 2MIN. OFF LIMITE D DUTY CYCL E.
50W MAX/OUTPUT L PS
I.T.E
POW ER SUPPLY
41JC
ASSEMBLED IN COO
CSA-PWS10S-HUB
INPUT: 120-240V~, 50/60 Hz, 5A MAX.
OUTP UT: 24V , 350WCON TINU OUS,
425W 2MIN. ON 2MIN. OFF LIMITE D DUTY CYCL E.
50W MAX/OUTPUT L PS
REPLACEMENT FUSE F1-F10:
5 X 20 MM 4A, 250V~
TI ME LAG F USE
PN 6506308
SNXXXXX
000 00
Installation Guide – DOC. 7438C Power Supply for Crestron Shade Motors: CSA-PWS10S-HUB • 7