System information

Crestron 3-Series Control Systems Reference Guide
Reference Guide – DOC. 7150A 3-Series Control Systems • 59
“IP Table” Window
3. Use the drop-down menu at the top of the window to choose a program IP
table to modify.
4. If the control system already has an IP table that is to be modified, click
Load From Device to retrieve the IP table that is stored on the control
system.
5. To add a new table entry, click Add Entry. Existing entries can be
modified by selecting an entry from the list and clicking Modify Entry.
Click Remove (Del) to remove a selected IP entry or click Clear List to
remove all of the entries from the IP table. To add an IP table entry perform
the following steps:
a. Click Add Entry. The “IP Table Entry” window opens.
b. As shown in the following diagram, select the hexadecimal IP ID of the
device from the IP ID list. The IP ID of the device must match the IP
ID that is specified for the device in the SIMPL Windows program.