System information

Reference Guide Crestron 3-Series Control Systems
40 • 3-Series Control Systems Reference Guide – DOC. 7150A
Enable SSL with a Self-Signed Certificate
1. Open Crestron Toolbox and establish communications with the control
system as described in “Establishing Communications with the Control
System” on page 6.
2. Select Functions | SSL Management… to open the “SSL Management”
window.
“SSL Management” Window
3. Check Enable SSL.
4. Select Self-Signed and click OK. The control system reboots.
This generates a self-signed certificate that can be temporarily used while a
CA-signed certificate is obtained. Alternatively, the self-signed certificate can still be
used so long as the client is interested only in data encryption and not server identity.
Generate a Certificate Signing Request (CSR)
1. Open Crestron Toolbox and establish communications with the control
system as described in “Establishing Communications with the Control
System” on page 6.
2. Select Functions | SSL Management… to open the “SSL Management”
window.
3. Select the Certificate Management arrow (
) to display the “Certificate
Management” drop-down menu.
4. Select Generate Certificate Request… from the drop-down menu.