System information

Reference Guide Crestron 3-Series Control Systems
24 • 3-Series Control Systems Reference Guide – DOC. 7150A
Lan9221 identified. ID_REV = 0x92210000
USB RESET
Use IntPhy
Auto-MDIX Enable by default!!!
LayMgr.cpp: Layout Manager successfully initialized to 1
Info: CrestronMonitor.exe # 09:38:31 10-09-2013 # Crestron applications already installed
Warning: ConsoleServiceCE.exe # 09:38:36 10-09-2013 # ReadInInitialLinkStatus - Attempt to read
static DNS failed ... Defaulting
Notice: ConsoleServiceCE.exe # 09:38:37 10-09-2013 # Got Security Flag: 0
Info: TLDM.exe # 09:38:45 10-09-2013 # THAL loading now ..
Info: TLDM.exe # 09:38:45 10-09-2013 # TLDM Starting..
Info: TLDM.exe # 09:38:45 10-09-2013 # Resuming rcv task now
Info: TLDM.exe # 09:38:45 10-09-2013 # Successfully registered with the console service - Console
available
Info: RfGateway.exe # 09:38:46 10-09-2013 # TLDMInterfaceReadInMessageQueueSize - Queue size
defaults to 500
Info: nk.exe # 09:38:46 10-09-2013 # IEX: Host chip found (count 2)
Info: nk.exe # 09:38:46 10-09-2013 # IEX: NCP initialized successfully!
Info: nk.exe # 09:38:46 10-09-2013 # IEX: halStackSeedRandom=348A9A45
Ok: SimplSharpPro.exe # 09:38:58 10-09-2013 # Successfully registered the application with the TLDM
Ok: SimplSharpPro.exe # 09:39:03 10-09-2013 # Creating 5 User threads with initial priority 253
Info: CRESLOG.exe # 09:39:04 10-09-2013 # PersistentLog: Logging is started!
Notice: ConsoleServiceCE.exe # 09:41:13 10-09-2013 # USB Connection has been made.
USB RESET
USB RESET
Persistent log contents during current boot end
Reading Error Messages
Error messages are dispayed in the following format:
{Error Level} :{Application} [App#] # [HH:MM:SS MM-DD-YYYY] # Message
The error level field indicates the severity of the error message. Error levels range
from OK to Fatal:
• OK
• Notice
• Warning
• Error
• Fatal
The application field indicates the running program that produced the error:
• ConsoleServiceCE.exe – This is the application that runs all the
console transports, such as Ethernet and USB. It implements some basic
commands such as reboot.
• SystemCommandProcessor.exe – This is the application that handles
all system level commands, such as restore.
• CresLog.exe – This is the application responsible for writing error
messages, RM Logging, and Persistent Log.
• RfGateway.exe – This is the application that runs on control systems
with built-in RF gateways.
• RouterTransportProcess.exe – This is the application responsible
for the router communication subsystem. Applicable only to control
systems with a Control Subnet port.
• DisplayManager.exe – This application is responsible for user
interface projects such as front panel, on-screen display, or touch screen.