System information

Crestron 3-Series Control Systems Reference Guide
Reference Guide – DOC. 7150A 3-Series Control Systems • 11
RJ-45 Pinouts
4. Open the address book in Crestron Toolbox by selecting Tools | Manage
Address Book or clicking
.
5. Create a new entry for the control system by clicking Add Entry or
pressing F3.
6. Enter a name for the control system connection and select TCP as the
connection type.
“Address Book” Window - Entering New TCP-IP Entry
7. Enter the IP address or host name of the control system that was created on
page 10.
8. Click OK to save the address book entry.
9. To verify the connection, click the
icon. If the settings are correct, the
“System Info” window is displayed.