System information

Crestron 3-Series Control Systems Reference Guide
Reference Guide – DOC. 7150A 3-Series Control Systems • 7
The COMPUTER port on the control system connects to the USB port on the PC
via the included Type A to Type B USB cable:
1. Use the Address Book in Crestron Toolbox to create an entry using the
expected communication protocol (USB). When multiple USB devices are
connected, identify the control system by entering the device name in the
Model text box, the unit’s serial number in the Serial text box or the unit’s
host name in the Host Name text box. The host name can be found in the
“System Info” window in the section marked Ethernet; however,
communications must be established in order to see this information in the
“System Info” window.
2. Display the control systems’s “System Info” window (click the
icon);
communications are confirmed when the device information is displayed.