Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 98
Appendix G: Controller Zone Name Module
v8.3.0 Parameters and I/O
This module provides an interface for volume commands and feedback between
your program and instances of the Kaleidescape App for iPad configured with a
controller zone name. The controller zone name in the received command is
checked against the controller zone name parameter and the corresponding output
is pulsed. When an input changes a string is generated with the corresponding
controller zone name parameter. Only instances of the Kaleidescape App for iPad
configured with the same controller zone name will respond to the feedback.
Parameters
Controller_Zone_Name_X
This must match the Controller Zone Name entered in the settings of the
Kaleidescape App for iPad.
Inputs
[CZN_X_Volume Capabilities] Sends the volume capabilities to the
Kaleidescape App for iPad, supported values
are:
[CZN_X_Mute_On_fb], [CZN_X_Vol_Level]
The module passes this feedback to an instance
of the Kaleidescape App for iPad configured with
the matching controller zone name so that the
user can see the current volume level and mute
state in the app.
Outputs
[CZN_X_Volume_Up], [CZN_X_Volume_Down], [CZN_X_Volume Mute]
These outputs pulse to indicate volume
commands were received from an instance of the
Kaleidescape App for iPad configured with the
matching controller zone name.
0
No volume control or feedback
1
Volume control but no
mute or feedback
3 Volume and mute control but no feed back
5 Volume control and feedback but no mute
7 Volume and mute control with volume feedback
15 Volume and mute control with feedback