Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 94
[Random] Toggles random music playback. Note that this
does not always function because some music
always plays back in random order. See Music
items in the Kaleidescape System on page 14 for
details.
[Repeat] Toggles repeat music playback. Note that this
does not always function because some music
always repeats. See Music items in the
Kaleidescape System on page 14 for details.
[Preset_Lock] When this input is high, saving any preset is
disabled.
[Preset_First] Triggers the first defined preset, starting at
preset 1 and moving forward from there. Any
preset not stored in the Kaleidescape System is
skipped.
[Preset_Next], [Preset_Previous]
Cycles through module presets, skipping any
presets not been stored in the Kaleidescape
System. If a preset is currently active, then the
cycle starts there. If no presets are active, the
cycle starts with the most recently selected
preset.
[Preset1] - [Preset10] Triggers or sets the preset. If the [Lock] input is
low and the input remains high (held) for the
amount of time specified by the Hold Time
parameter, the preset will be saved. When the
preset is saved, the audio will mute for a
moment.
[Command_To_Player$] This input can be used to send any arbitrary
command to the component. The module
automatically appends the correct CPDID, Zone
ID, sequence number, and terminating colon and
line feed to any string sent to this input.
For example, PLAY becomes 01.1/1/PLAY:\n
for a module controlling CPDID 01 Zone ID 1.
This input provides direct access to the control
protocol.
Outputs
{{Tx$}} Used for connection to the TX$ signal of the
connected RS-232 or TCP/IP client.
[Now_Playing_Item$] Information about the item currently playing. If
the user is playing a genre, it displays the genre