Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 86
Appendix D: SATP Module v8.4.0 Parameters
and I/O
Parameters
Control Protocol Device ID (CPDID)
This must match the CPDID of the component as set through the Kaleidescape
browser interface (http://my-kaleidescape). None is the default.
When using None, the Crestron processor must be directly connected to the
designated component.
Zone ID
This indicates which zone output to control on the Kaleidescape player.
Time Update Interval
This indicates whether or not the component updates the time remaining. If the
song position, remaining or progress level are used this needs to be set to 1. If this
information is not used, set this to 0 to conserve Crestron processing.
List Window Length
This indicates the number of indirect text fields on the touch panel available for
displaying selections while browsing or searching music. This can also be
overridden using the analog input of the same name.
Kaleidescape App for iPad Volume Ability
This indicates the volume buttons and feedback that will be displayed on the
Kaleidescape App for iPad.
Inputs
{{Rx$}} Used for connection to the RX$ signal of the
connected RS-232 port or TCP/IP client.
{{Connect-F}} Resends startup messages to get the module
feedback in sync with the component. If using
TCP/IP, tie this to the Connect-F output of the
TCP/IP client to re-sync the feedback if the
connection cycles. If using RS-232, simply put a 1
on this input.