Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 80
Details page
[Details_Visible] Used to drive the details page on the touch
panel. This is high when the details can be
displayed and low when details have been made
obsolete by an onscreen change. Details should
not be displayed when this is low.
[Details_Text$] A complete description of the item currently
highlighted in the OSD, formatted to be similar to
the text of the details page of the item on the
OSD.
[Details_Title$] The title of the content that is currently
highlighted in the OSD.
[Details_Cover_URL$] The URL of cover art image for the highlighted
item (movie or music). A touch panel that
supports dynamic graphics can display the
image at this URL.
[Movie_Details_Visible] Same as [Details_Visible], except that this
signal and the next one specify the aspect ratio
of the cover art for the touch panel. A high signal
indicates that the details should be displayed,
and that the cover art being reported through
[Details_Cover_URL$] is a movie, and that the
touch panel should use the 10:7 aspect ratio for
cover art.
[Music_Details_Visible] Same as [Details_Visible], except that this
signal and the previous one specify the aspect
ratio of the cover art for the touch panel. A high
signal indicates that the details should be
displayed, and that the cover art being reported
through [Details_Cover_URL$] is a CD, and
that the touch panel should use the 1:1 aspect
ratio (square) for cover art.
Keyboard/Keypad
[Keyboard_Active] Feedback indicating that keyboard input is
expected. This should be used to show an A-Z, 0-
9 keyboard on a touch panel.
[Keypad_Active] This feedback indicates that keypad input is
being solicited. This should be used to show a
0-9 keypad on the touch panel.