Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 71
Movie playback
[Disc_Menu] For most DVD or Blu-ray discs, this command
calls up the disc menu. The operation of this key
can vary from disc to disc. This command can
also cue the lighting system, if so configured.
[Disc_Top_Menu] For most DVD or Blu-ray discs, returns to the
main disc menu. The operation of this key can
vary from disc to disc.
[DVD_Resume] For most DVDs, dismisses the DVD menu and
returns to the previously viewed content. The
operation of this key can vary from disc to disc.
This command has no effect on Blu-ray discs.
[Disc_or_Kaleidescape_Menu]
Functions as [Disc_Menu] during content
playback and as
[Kaleidescape_Menu_Toggle] when not in
content playback. This command can be used
when control buttons are limited.
[Force_Disc_Menu_mode] Temporarily forces the output of
[Disc_Menu_fb] to go high. Useful as an
override when the menu detection is incorrect.
[Force_clear_Disc_Menu_mode]
Temporarily forces the output of
[Disc_Menu_fb] to go low.
[Force_Disc_Menu_mode_toggle]
Temporarily toggles the state of
[Disc_Menu_fb].
[Favorite_Scene_Set_Start] Sets the beginning of the favorite scene. If not
set, this defaults to the beginning of the content.
[Favorite_Scene_Set_End] Sets the end of the favorite scene. If not set, this
defaults to the end of the content.
[Favorite_Scene_clock] Toggles the state of [Favorite_Scene_fb],
which can be used to control when the touch
panel shows the favorite scene start and end
buttons.
[Status_and_Settings_Toggle]
Toggles the display of the movie overlay.
[Show_Navigation_Overlay] Takes the user directly to the navigation option
of the movie overlay.