Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 68
Navigation
[Up], [Down], [Left], [Right]
OSD navigation controls. Can be held down to
speed the user through whatever list or menu
currently being navigated.
[Page_Up], [Page_Down] For OSD screens showing a list, scrolls the list up
or down by several lines at a time. Can be held
down to speed the user through whatever list or
menu currently being navigated. Not required for
basic navigation.
[Select] Selects the option currently highlighted, finishes
keypad input, clears error and warning messages
and can re-sort the movie list.
[Child_Select] Selects the highlighted item in the OSD. Also
puts the player in Child Mode displaying the
child user interface.
[Cancel] Dismisses the Kaleidescape menu, dismisses the
movie details page, halts keypad or keyboard
input, and dismisses the movie overlay. For most
functions, the [Stop] key performs identically,
with the noted exception of dismissing the movie
overlay. Not required for basic navigation.
The next three signals are used for OSD Video. These signals allow a touch overlay
to be created where the user can touch any aspect of the Kaleidescape OSD or the
disc menu to make a selection. For this feature to function, a transparent slider
must be placed over the video window. On the slider’s Design tab, set the Dimension
to 2-D, the Indicator Type to None and ensure that Signed Feedback is Off. The Slider’s
Analog Join must be set as well as the Digital Press Join. The first Analog value is the X
value and the second is the Y value.
When used for the first time, the OSD prompts to calibrate the video touch
interface.
[Touch_Channel] Tie this signal to the Digital Press Join of the slider.
Indicates that the video window has been
touched.
[Touch_X] Tie this signal to the X value of the slider.
Indicates the X coordinate of the video window
that was selected.
[Touch_Y] Tie this signal to the Y value of the slider.
Indicates the Y coordinate of the video window
that was selected.