Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 49
In this example, the TPS-15 signals from the SATP Demo program are used for the
TPS-4L touch panels.
Use the following steps to copy signal names from TPS-15 in the demo modules.
1. Open a new instance of SIMPL Windows.
2. From the File menu, open the Kaleidescape OSD Demo program.
3. Click the Program button.
Figure 34: Program button
4. In the Detail view, scroll to the TPS-15 symbol. Copy the digital input signals.
5. Select the first input signal and press Shift-End to highlight all the digital
input signals.
6. Press Ctrl-C to copy.
7. Return to the program and open the Kitchen touch panel in the Detail view.
8. Select the first digital input signal and press Ctrl-V to paste the signals. The
Preserve Unconnected Signals? window appears.
Figure 35: Preserve Unconnected Signals? window
9. Click Yes. The Expand Symbol? window appears.
Figure 36: Expand Symbol? window