Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 35
When the user selects Control Zone, the Select Music Zone dialog box appears with all
the available music zones in the system, labeled with the names assigned in the
Kaleidescape browser interface.
Figure 15: Select Music Zone dialog box
If the OSD is not controlling the local zone when the user selects new music for
playback, a reminder that control is for a different music zone will appear. The user
then has the option to confirm playback or to select another music zone.
OSD module music zone selection
The zone that the OSD is controlling can be set in the Kaleidescape OSD module.
Control can be specified by using either the CPDID or serial number of the
component. Note that this feature functions whether or not the CPDID is set.
Because either CPDID or serial number can be used, the module also provides
feedback using both CPDID and serial number when stating which music zone the
OSD is currently controlling as shown in the following figure.
Figure 16: OSD module music zone control
CPDID control
To select which zone to control using the component CPDID instead of the serial
number, simply substitute the CPDID for the serial number in the strings, and take
the feedback from the [Controlling_CPDID.Zone$] output of the module. For
instance, to control zones 1 and 2 of a Music Player with CPDID 05, use the
numbers in the following figure.