Installation guide

Programming Crestron Controllers for a Kaleidescape System
Page 22
Importing modules
Downloading and extracting Kaleidescape modules and templates
for Crestron
Use the following steps to download and extract the Kaleidescape modules and
templates for the Crestron system:
1. Download the Kaleidescape modules and templates for Crestron ZIP file
(Download all Crestron files) from the Support page on the Kaleidescape
website (www.kaleidescape.com/support).
2. Extract the files from the ZIP file to the C:\Crestron\Simpl\PROGRAMS\
folder.
Module contents
Each module consists of three types of files.
 SIMPL Windows UMC file
 SIMPL+ USP file
 SIMPL+ USH file
The SIMPL+ files are not intended for direct use in a program, but are used as a
processor for the accompanying UMC file.
Note: Kaleidescape modules for Crestron are designed to be used with the
latest version of SIMPL Windows. Verify that the most recent version of
SIMPL Windows is installed.
File names indicate the current version of the module, indicated by X’s in the file
names below.
The Kaleidescape OSD module consists of three files.
 Kaleidescape OSD vX.X.X.umc
 Kaleidescape OSD Processor vX.X.X.usp
 Kaleidescape OSD Processor vX.X.X.ush
The Kaleidescape SATP module consists of three files.
 Kaleidescape SATP vX.X.X.umc
 Kaleidescape SATP Processor vX.X.X.usp
 Kaleidescape SATP Processor vX.X.X.ush
The Kaleidescape Keypad Presets module consists of three files.
 Kaleidescape Presets vX.X.X.umc
 Kaleidescape Presets Processor vX.X.X.usp