Crestron CNXRMCS Current Sensor for Room Solution Boxes Operations Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2003 Crestron Electronics, Inc.
Crestron CNXRMCS Current Sensor for Room Solution Boxes Contents Current Sensor for Room Solution Boxes: CNXRMCS 1 Introduction....................................................................................................................1 Specifications.....................................................................................................1 Physical Description ..........................................................................................2 Setup ...........................
Crestron CNXRMCS Current Sensor for Room Solution Boxes Current Sensor for Room Solution Boxes: CNXRMCS Introduction The Current Sensor for Room Solution Boxes, CNXRMCS, senses the current from a television (9” color or larger) or other high current electronic devices.
Current Sensor for Room Solution Boxes Crestron CNXRMCS Specifications of the CNXRMCS - continued SPECIFICATION Dimensions & Weight DETAILS Height: 3.10 in (7.87 cm) Width: 2.10 in (5.33 cm) Depth: 2.34 in (5.94 cm) Cord Length: Approximately 6 ft (1.83 m) Weight: 1.60 oz (0.20 kg) Physical Description Refer to the physical views in the following illustration. The CNXRMCS contains an AC plug on one side and an AC outlet on the other.
Crestron CNXRMCS Current Sensor for Room Solution Boxes Setup Connector Wiring Insert the 2-pin connector in the current sensor connection (labeled “SENS”) on a Room Solution Box. The solid black wire of the digital connector cord must be attached to pin 2 (G or ground pin) of the connector and the striped wire must be attached to pin 1 (signal). Plug the CNXRMCS in an AC outlet and the high current device in the CNXRMCS. Refer to the following illustrations.
Current Sensor for Room Solution Boxes Crestron CNXRMCS CNXRMCS Hookup Diagram 9"or Larger Television or High Current Device CNXRMCS To 120VAC Plug Power Plug Room Solution Box CNXRMC, CNXRMCLV or I/O port of a Control Processor 2-pin Connector (SENS) Programming For a control system to recognize the ON/OFF state of a high current device from the CNXRMCS, a program must be created in SIMPL Windows. The output goes high when the monitor (i.e.
Crestron CNXRMCS Current Sensor for Room Solution Boxes Problem Solving Troubleshooting The table below provides corrective action for possible problems with the CNXRMCS. If further assistance is required, please contact a Crestron customer service representative. CNXRMCS Troubleshooting TROUBLE POSSIBLE CAUSES CORRECTIVE ACTION Room Solution Box not sensing television OFF/ON status. Television or other high current device not drawing enough current to trigger CNXRMCS.
Current Sensor for Room Solution Boxes Crestron CNXRMCS Further Inquiries If after reviewing this Operations Guide for the CNXRMCS, you cannot locate specific information or have questions, please take advantage of Crestron's award winning customer service team by calling: • In the US and Canada, call Crestron’s corporate headquarters at 1-888-CRESTRON [1-888-273-7876]. • In Europe, call Crestron International at +32-15-50-99-50. • In Asia, call Crestron Asia at +852-2341-2016.
Crestron CNXRMCS Current Sensor for Room Solution Boxes Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operation Guide – DOC. 8175A 01.
