Installation guide

Function & Numeric Keypads Crestron CNX-BF/BN12
“CNX-BF12 & CNX-BN12 Device Settings” Window
• The ID code specified in the SIMPL Windows program must
match the Net ID of each unit.
Program
Manager
Program Manager is the view where programmers “program” a Crestron
control system by assigning signals to symbols. The symbol can be
viewed by double clicking on the icon or dragging it into Detail View.
Each signal in the symbol is described in the SIMPL Windows help file
(F1).
Programming with VisionTools
®
Pro-e
To play WAV files, a CNX-BF12 or CNX-BN12 project must be created
in VisionTools Pro-e, with WAV files and correct join numbers added to
the project using Tools | Sound Manager. For more information, refer to
the VisionTools Pro-e help file.
NOTE: If you need to create WAV files, refer to Windows Help (Using
Sound Recorder).
NOTE: The keypad project allows you to add WAV files only. You
cannot add pages or keypad buttons to the project. Join numbers assigned
to a WAV file in VisionTools Pro-e begin at 20 because join numbers
below 20 are already assigned to other keypad buttons or functions.
Once the project is created, use File | Upload Project from the
VisionTools Pro-e main menu to load it in the CNX-BF12 or
CNX-BN12. For more information, refer to the VisionTools Pro-e help
file.
16 • Function & Numeric Keypads: CNX-BF/BN12 Operations & Installation Guide – DOC. 8185A