Crestron CNX-BF12 & CNX-BN12 Designer Function & Numeric Keypads Operations & Installation Guide
This document was prepared and written by the Technical Documentation department at: Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 1-888-CRESTRON All brand names, product names and trademarks are the property of their respective owners. ©2006 Crestron Electronics, Inc.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Contents Function & Numeric Keypads: CNX-BF12 & CNX-BN12 1 Introduction ............................................................................................................................... 1 Features and Functions ................................................................................................ 1 Specifications ..............................................................................................................
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Function & Numeric Keypads: CNX-BF12 & CNX-BN12 Introduction Features and Functions • • • • • • • • Compatible with standard electrical gang boxes Ergonomic buttons are easy to read from any angle Backlit buttons are easy to locate Programmable LED indicators provide visual feedback Speaker provides audio feedback Temperature sensor reports to Cresnet® for HVAC monitoring1 Available in almond (A), black (B) and white (W)2 Additional source buttons
Function & Numeric Keypads Crestron CNX-BF/BN12 Specifications Specifications for the CNX-BF12 & CNX-BN12 are listed in the following table.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads CNX-BF12 & CNX-BN12 Specifications (Continued) SPECIFICATION Dimensions (including faceplate) Height Width Depth Weight Available Models C2N-DBF/N12A C2N-DBF/N12B C2N-DBF/N12W Available Accessories B-G1-FP B-G2-FP B-G3-FP B-G1-FPAR B-G1-WPK DETAILS 4.77 in (12.10 cm) 2.92 in (7.40 cm) 1.54 in (3.91 cm) – without connector 2.
Function & Numeric Keypads Crestron CNX-BF/BN12 NOTE: Crestron software and any files on the website are for authorized Crestron dealers and Crestron Authorized Independent Programmers (CAIP) only. New users may be required to register to obtain access to certain areas of the site (including the FTP site). Physical Description This section provides information on the connections, controls and indicators available on your CNX-BF12 & CNX-BN12.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads CNX-BF12 & CNX-BN12 Overall Dimensions Side View with buttons installed 1.54 in (3.91 cm) 1.07 in (2.71 cm) Front View Back View 2.92 in (7.40 cm) 4.77 in (12.
Function & Numeric Keypads Crestron CNX-BF/BN12 Connectors, Controls & Indicators (Continued) # CONNECTORS1, CONTROLS & INDICATORS DESCRIPTION 3 Speaker 4 NET1 Provides audio feedback, adjustable volume Four-position terminal block connector for data and power. Connects to Cresnet control network. An interface connector provided. Pin 1 (24) Power Pin 2 (Y) Data Pin 3 (Z) Data Pin 4 (G) Ground 1. Interface connector for NET port is provided with the unit. 2. CNX-BF12 only.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads button, and device transport control and volume control buttons. A kit with additional source buttons for the CNX-BF12 is also provided (refer to illustration on page 6). Industry Compliance As of the date of manufacture the CNX-BF12 & CNX-BN12 have been tested and found to comply with specifications for CE marking and standards per EMC and Radiocommunications Compliance Labelling. NOTE: This device complies with part 15 of the FCC rules.
Function & Numeric Keypads Crestron CNX-BF/BN12 Setup Network Wiring When wiring the network, consider the following: • Use Crestron Certified Wire. • Use Crestron power supplies for Crestron equipment. • Provide sufficient power to the system. CAUTION: Insufficient power can lead to unpredictable results or damage to the equipment. Please use the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators).
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads • Two 1-in. pan head Phillips screws (supplied) After the Cresnet network wiring has been installed and verified, use the following procedure to install the keypad in a standard, single-gang electrical box (refer to illustrations on page 10): 1. Turn Cresnet system power OFF. 2. Connect the Cresnet cable with supplied connector plug to the keypad’s Cresnet port and the other end to the control system. 3. Remove faceplate and divider from keypad. 4.
Function & Numeric Keypads Crestron CNX-BF/BN12 Disassembly View Button unit Removable buttons Faceplate Single gang detent plate LED window Divider Installation View Single gang electrical box (2.5 in. depth recommended) Button unit 1 in. panhead 10 • Function & Numeric Keypads: CNX-BF/BN12 Operations & Installation Guide – DOC.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Hardware Hookup Make the necessary connections as called out in the illustration that follows this paragraph. Refer to “Network Wiring” on page 8 before attaching the 4-position terminal block connector. Apply power after all connections have been made. When making connections to the CNX-BF12 & CNX-BN12, use Crestron power supplies.
Function & Numeric Keypads Crestron CNX-BF/BN12 CAUTION: The removable buttons fit snugly on the rubber membrane and must be removed carefully to avoid pulling the membrane from the unit. Once the membrane is detached, you may be unable to reattach it. 4. While holding adjacent buttons in place, carefully pull the button(s) to be replaced from the rubber membrane. 5.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Programming Software Have a question or comment about Crestron software? Answers to frequently asked questions (FAQs) can be viewed in the Online Help section of the Crestron website. To post a question or view questions you have submitted to Crestron’s True Blue Support, log in at http://support.crestron.com. First-time users will need to establish a user account.
Function & Numeric Keypads Crestron CNX-BF/BN12 Software (Continued) TASK REQUIRED SOFTWARE VERSION Program with simple wizards for systems using a CNX-BF12 and/or CNX-BN12 (optional but recommended). Crestron SystemBuilder™ version 2.0 or later with SystemBuilder Templates version 2.0 or later. Refer to software release notes or Crestron website for other required Crestron software packages.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Locating the CNX-BF12 & CNX-BN12 in the Device Library • The system tree of the control system displays the device in the appropriate slot with a default Net ID as shown in the following illustration. C2Net Device, Slot 9 • Additional CNX-BF12 & CNX-BN12 devices are assigned different Net ID numbers as they are added. • If necessary, double click a device to open the “Device Settings” window and change the Net ID, as shown in the following figure.
Function & Numeric Keypads Crestron CNX-BF/BN12 “CNX-BF12 & CNX-BN12 Device Settings” Window • The ID code specified in the SIMPL Windows program must match the Net ID of each unit. Program Manager Program Manager is the view where programmers “program” a Crestron control system by assigning signals to symbols. The symbol can be viewed by double clicking on the icon or dragging it into Detail View. Each signal in the symbol is described in the SIMPL Windows help file (F1).
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads NOTE: This can be done after an identity code (NET ID) is assigned to the keypad or after installation (refer to “Identity Code” or “Installation” on page 8 for details). Example Program An example program for the CNX-BF12 & CNX-BN12 is available from the Crestron website (http://www.crestron.com/exampleprograms). Operations & Installation Guide – DOC.
Function & Numeric Keypads Crestron CNX-BF/BN12 Uploading and Upgrading Crestron recommends using the latest programming software and that each device contains the latest firmware to take advantage of the most recently released features. However, before attempting to upload or upgrade it is necessary to establish communication. Once communication has been established, files (for example, programs, projects or firmware) can be transferred to the control system (and/or device).
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads SIMPL Windows If a SIMPL Windows program is provided, it can be uploaded to the control system using SIMPL Windows or Crestron Toolbox. VisionTools Pro-e Upload the VisionTools Pro-e file to the keypad using VisionTools Pro-e or Crestron Toolbox. Firmware Check the Crestron website to find the latest firmware. (New users may be required to register to obtain access to certain areas of the site, including the FTP site.
Function & Numeric Keypads Crestron CNX-BF/BN12 Operation The CNX-BF12 serves as a source keypad. The CNX-BN12 can be used to expand the capabilities of the source keypad and is ideal for audio device functions such as selecting a particular CD track number or a certain CD from a CD changer. All buttons on the keypad are functionally identical and have light emitting diodes (LEDs) that serve as user feedback indicators.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Problem Solving Troubleshooting The following table provides corrective action for possible trouble situations. If further assistance is required, please contact a Crestron customer service representative. CNX-BF12 & CNX-BN12 Troubleshooting TROUBLE Keypad does not function. POSSIBLE CAUSE(S) CORRECTIVE ACTION Keypad is not communicating with the network. Use Crestron Toolbox to poll the network. Verify network connection to the device.
Function & Numeric Keypads Crestron CNX-BF/BN12 CNX-BF12 & CNX-BN12 Troubleshooting (Continued) TROUBLE Keypad does not function (continued). Button LED does not illuminate. Pressing button yields wrong result. No sound from speaker POSSIBLE CAUSE(S) CORRECTIVE ACTION Keypad Net ID is the same as another device’s Net ID. Feedback signal names incorrect in SIMPL Windows program. LED intensity set to 0 (zero). Keypad is mounted upside down. Keypad programmed incorrectly.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads the Crestron Power Calculator to help calculate how much power is needed for the system (http://www.crestron.com/calculators). When calculating the length of wire for a particular Cresnet run, the wire gauge and the Cresnet power usage of each network unit to be connected must be taken into consideration. Use Crestron Certified Wire only.
Function & Numeric Keypads Crestron CNX-BF/BN12 maintain signal quality throughout the network. Also, for networks with lengthy cable runs it may be necessary to add a Hub/Repeater after only 20 devices. Reference Documents The latest version of all documents mentioned within the guide can be obtained from the Crestron website (http://www.crestron.com/manuals). This link will provide a list of product manuals arranged in alphabetical order by model number.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Software License Agreement This License Agreement (“Agreement”) is a legal contract between you (either an individual or a single business entity) and Crestron Electronics, Inc. (“Crestron”) for software referenced in this guide, which includes computer software and, as applicable, associated media, printed materials, and “online” or electronic documentation (the “Software”).
Function & Numeric Keypads Crestron CNX-BF/BN12 If You are a business or organization, You agree that upon request from Crestron or its authorized agent, You will within thirty (30) days fully document and certify that use of any and all Software at the time of the request is in conformity with Your valid licenses from Crestron of its authorized agent.
Crestron CNX-BF12 & CNX-BN12 Function & Numeric Keypads Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number.
Crestron Electronics, Inc. 15 Volvo Drive Rockleigh, NJ 07647 Tel: 888.CRESTRON Fax: 201.767.7576 www.crestron.com Operations & Installation Guide – DOC. 8185A (2002201) 12.06 Specifications subject to change without notice.
