Installation guide

Single Gang Keypads Crestron CNX-B2/B4/B6/B8/B12
28 • Single Gang Keypads: CNX-B2/B4/B6/B8/B12 Operations & Installation Guide - DOC. 8173A
“Send Program” Window
4. To verify that the program has been transferred successfully,
select Diagnostics | Report Program Information. This
should display a window that provides details about the
current program loaded into the control system.
Uploading a VT Pro-e WAV File Project
The CNX-B12
keypad source
f
ile has the
extension .vtp.
A compiled VT
Pro-e file has
the extension
hex.
The VT Pro-e project file can be uploaded to the keypad using
VT Pro-e or via the Crestron Viewport.
Upload via VT Pro-e
1. Start VT Pro-e.
2. Select File | Open | Project to view the “Open” window,
navigate to the VT Pro-e file (.hex), and click Open.
3. Select File | Upload Project.
Upload via Crestron Viewport
1. Verify that the procedure for “Communication Settings” that
begins on page 23 has been performed.
2. As shown after this step, select File Transfer | Send
Touchpanel from the Viewport menu.