Specifications

Crestron Programming Design Kit

Doc. 5277J | crestron.com

CC2N-CBF-P Cameo Keypad, Flush Mount

C2N-CBD-P Cameo Keypad, Standard Mount

Exquisitely simple yet highly customizable, a single Cameo Keypad can be conﬁgured easily by the installer to

provide from two to eight buttons. Each keypad is actually furnished with an assortment of engrave-able button

caps in four different sizes to support a variety of physical layouts. Through programming, each button can be

conﬁgured to use "button events," affording up to three separate functions per button by tapping, double-tapping,

or holding the button. "Shift key" functionality is even possible, allowing any button to be held while pressing

another. Split small buttons may be installed in the bottom two positions only. Includes two (2) large, three (3)

medium, six small, and four (2 pair) split small button. When a button cap covers two or three buttons, the bottom

button of the set is activated. For example: For a two-button cap, if buttons 1 and 2 are covered, when the button

is pressed, this will activate button 2. For a three-button cap, if buttons 4, 5 and 6 are covered, when the button is

pressed, this will activate button 6. For a single button cap, if button 7 is covered, when the button is pressed, this

will activate button 5.

NOTE: No LED feedback will be provided for buttons 7 and 8.

Form I - C2N-CBF-P & C2N-CBD-P