Specifications

Crestron Programming Design Kit
20
Doc. 5277J | crestron.com
Crestron Engraver
The Crestron Engraver allows the user to create projects for engraveable interfaces such as Crestron touch screen
hard buttons, keypads, lighting controls, and FlipTop devices. These interfaces provide engrave-able text areas on
the buttons, and sometimes, on the faceplates.
Button caps are laser-engrave-able using the Crestron Engraver software; spacers are not engrave-able. The
engraving software provides up to three fields for each button cap to allow for the left/right and center press
functions, permits multiple lines of text, and also allows the user to specify the orientation of each button cap.
Use the Engraver to assign text, combine and un-combine buttons, exclude buttons, and add decorative borders.
Send the completed engraving project to Crestron via email for quick processing using the latest high quality laser
engraving technology. The new Crestron engraving software and equipment offers a more streamlined process that
allows for the delivery of finished buttons within 2-3 business days.
The Crestron Engraver allows the user to create cutout projects for non-engrave-able devices such as Crestron
switchers and control modules. These devices provide plastic slots where labeled strips can be inserted to identify
the push buttons on the unit. Use the Engraver to create and print the labeled strips that are properly formatted and
sized for the device. Simply cut the strip from the printout using the cut marks as a guide, and insert the strip into
the plastic slot.
For engrave-able devices such as Crestron keypads and touch screens, use the Crestron Engraver to:
• Select the color and finish of the faceplate and trim.
• Combine and un-combine button caps and engrave-able text areas.
• Exclude button caps.
• Assign text and decorative borders to buttons and engrave-able text areas.
Once the engraving project is created, send it directly to Crestron via email for quick processing using the latest
laser engraving technology. For non-engraveable devices, use the Engraver to design and print cutout labels that
are correctly formatted and sized for insertion into the plastic slots on the unit.
Printer and Paper Requirements for Cutout Labels
Adagio projects: Ink jet printer with ink jet transparency film.
Non-Adagio projects: 100 lbs (maximum) paper weight; flat (not glossy) paper type.
C2N-CBD and C2N-CFB Series Engraving
The engraving software provides a single line of up to 10 characters, including spaces, for single-button caps, two
lines of characters on double and triple-button caps, and a single line of up to four characters for small split-button
caps. Crestron Engraver software, Version 5.04.003.00 or later, is available from the Crestron Web site.