Crestron CNTV-CS Current Sensor for CNTV Contents Current Sensor for CNTV: CNTV-CS Description Functional Description Physical Description Leading Specifications Setup Digital Connector Wiring Hookup Programming Problem Solving Troubleshooting Further Inquiries Return and Warranty Policies Merchandise Returns / Repair Service CRESTRON Limited Warranty Operations Guide – DOC.
Crestron CNTV-CS Current Sensor for CNTV Current Sensor for CNTV: CNTV-CS Description Functional Description The Current Sensor for CNTV, CNTV-CS, senses whether a single television set (9” color or larger) is OFF or ON. The CNTV-CS senses the current used by the television that is connected to it, a large current indicates that the set is ON and the absence of (or very low) current indicates that the set is OFF. The current threshold is non-adjustable.
Current Sensor for CNTV Crestron CNTV-CS is approximately six feet long and is polarized with the black wire for ground (G) and the black with white-stripe wire as the “hot” wire. The connector attaches to the digital input of the CNTV. CNTV-CS Physical Views 1.93 2.04 AC PLUG AC OUTLET 3.16 DIGITAL CONNECTOR CORD IS APPROXIMATELY 6 FEET LONG Leading Specifications The table below provides a summary of leading specifications for the CNTV-CS.
Crestron CNTV-CS Current Sensor for CNTV Digital Connector Wiring BLACK WIRE CONNECTED TO PIN 5 OR GROUND (G) BLACK / WHITESTRIPE WIRE CONNECTED TO PIN 1, 2, 3 OR 4 Hookup Refer to the two diagrams after this paragraph. The CNTV-CS should be plugged into an AC outlet and the television to be current sensed is plugged into the CNTV-CS. The digital connector of the CNTV-CS is attached to the DIGITAL IN/OUT back panel connector of the CNTV.
Current Sensor for CNTV Crestron CNTV-CS Programming The CNTV-CS does not require programming. The program of the CNTV determines how the digital input from the CNTV-CS is recognized. Refer to CNTV Operations Guide (latest revision of Doc. 8105) for further information. Problem Solving Troubleshooting The table below provides corrective action for possible trouble situations of the CNTV-CS. If further assistance is required, please contact a Crestron technical support representative.
Crestron CNTV-CS Current Sensor for CNTV Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address. 2.
