User Guide

ManualsBrandsCrestron ManualsOtherCNLFDB-4

Crestron CNLFDB-4 Four Channel Fluorescent Dimmer Module

NEUTRAL

BREAKER

CIRCUIT

MODEL: CNLFDB-4

CRESTRON

NEUTRAL

SWITCHED

DIMMED

A.C. PHASE.

ALL CIRCUITS FEEDING THE CNLFDB-4 MUST BE ON THE SAME

PROVIDE SEPARATE NEUTRAL FOR EACH CIRCUIT.

NET

+ -

HI LO

CODE

NORMAL

OVERRIDE

ACTIVITY

NET POWER

NEUT

CIRCUIT #1

L - IN L - OUT DIM

CIRCUIT #2

L - IN L - OUT DIM

CIRCUIT #3

L - IN L - OUT DIM

CIRCUIT #4

L - IN L - OUT DIM

Hi-lume

"FDB" TYPE or

Eco-10™

"ECO" TYPE

BALLAST

TO CRESTRON CONTROL PROCESSOR.

REFER TO LATEST NETWORK

INTERCONNECT DRAWING (DOC. 5411).

CRESNET COLORS:

24: RED

Y: WHITE

Z: BLUE

G: BLACK

Hi-lume

"FDB" TYPE or

Eco-10™

"ECO" TYPE

BALLAST

OUTPUT CIRCUITS: 4

OUTPUT RATING: 16 AMP PER CIRCUIT

(REFER TO DIAGRAM FOR SUPPORTED LOAD TYPES)

INPUT/OUTPUT:

CNLFDB-4: 120 VAC, 60 Hz, SINGLE PHASE

CNLFDB-4-277: 277 VAC, 60 Hz, SINGLE PHASE

FOR PROPER OPERATION, CIRCUIT #1 MUST RECEIVE POWER

AND NEUTRAL (ON L-IN AND NEUT TERMINALS)

®®

This product is Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.

(E103692)

Crestron Electronics, Inc. DOC. 5456A

15 Volvo Drive (2009251)

Rockleigh, NJ 07647 07.06

Tel: 888.CRESTRON Specifications subject to change without notice.

Fax: 201.767.7576 www.crestron.com

Summary of content (2 pages)

PAGE 1
Crestron CNLFDB-4 Four Channel Fluorescent Dimmer Module OUTPUT CIRCUITS: 4 L - OUT L - IN L - OUT L - IN L - OUT L - IN INPUT/OUTPUT: CNLFDB-4: 120 VAC, 60 Hz, SINGLE PHASE CNLFDB-4-277: 277 VAC, 60 Hz, SINGLE PHASE Hi-lume ® "FDB" TYPE or Eco-10™ "ECO" TYPE BALLAST Hi-lume ® "FDB" TYPE or Eco-10™ "ECO" TYPE BALLAST DIMMED SWITCHED NEUTRAL L - OUT NEUT L - IN CIRCUIT #1 DIM CIRCUIT #2 DIM CIRCUIT #3 DIM CIRCUIT #4 DIM OUTPUT RATING: 16 AMP PER CIRCUIT (REFER TO DIAGRAM FOR SUPPORTED LOAD T
PAGE 2
Return and Warranty Policies Merchandise Returns / Repair Service 1. No merchandise may be returned for credit, exchange, or service without prior authorization from CRESTRON. To obtain warranty service for CRESTRON products, contact an authorized CRESTRON dealer. Only authorized CRESTRON dealers may contact the factory and request an RMA (Return Merchandise Authorization) number. Enclose a note specifying the nature of the problem, name and phone number of contact person, RMA number, and return address.