Specifications

infiNET™ Dimmers Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF
Adding an infiNET Device to the C2N-MNETGW
• The system tree of the control system displays the device in the appropriate
slotwith a default MNETID as shown in the following illustration.
C2Net Device, Slot 6, with infiNET Device
SIMPL Windows adds the selected infiNET device with a default MNET
ID. Following are the default MNET IDs used by SIMPL Windows for each
of the dimmer models:
• CLW-DIM1RF: 03
• CLW-DIM4RF: 05
• CLW-DIMS1RF: 04
• CLW-DIMS4RF: 06
NOTE: The default MNET ID used by SIMPL Windows is different from
the default ID that is installed on an infiNET device when it ships from the
factory.
NOTE: If the default MNET ID is already in use, SIMPL Windows will
assign the next available MNET ID.
NOTE: infiNET repeaters such as the C2N-MNETRPT are not added in
SIMPL Windows as there is no control communication between a control
system and a repeater.
24 • infiNET Dimmers: Crestron CLW-DIM1/4RF, -DIMS1/4RF, -SLVD1RF Operations Guide - DOC. 6396A