Specifications

iLux Lighting Systems
Installation Guide – DOC. 6394F iLux Lighting Systems: CLS-C6 & CLS-C6M • 5
Adding External Power Supplies
Additional power supplies are required to support more than four keypads or shade controllers on the LOCAL
DEVICES network. Also, each C2N-SDC-DC, CSM-QMT50-DCCN and CSC-DCCN shade controller requires its
own additional power supply. The diagram below illustrates a scenario where an external power supply is required
to add a shade controller and other devices to a network that already contains four shade controllers. The actual
number of external power supplies required depends on the system configuration. The illustrations on the following
pages show a variety of installation configurations.
Adding External Power Supply for C2N-SDC-DC Controlled Shades
Adding External Power Supply for CSM-QMT50-DCCN and CSC-DCCN Controlled Shades
Shade
Controller
Power
Supply
Keypad GLS-SIM
Shade
Controller
Shade
Controller
Touch
Screen
Photocell
Occupancy
Sensor
Shade
Controller
Shade
Controller
CLS-C6
Cresnet
(Local Devices)
Cresnet Gnd &
Data Lines (Y, Z)
Only
Lighting
Loads
Crestron
Certified Wire
CSA-PWS225/450
Power Supply
Shade
Shade
CSA-PWS40
Power Supply
CLS-C6
Cresnet
(Local Devices)
Lighting
Loads
Crestron
Certified Wire