Specifications

iLux Lighting Systems
10 • iLux Lighting Systems: CLS-C6 & CLS-C6M Installation Guide – DOC. 6394F
Testing
The following illustration shows the front panel of the unit and the controls used during installation.
Front Panel Controls and Indicators
Verify the basic installation and wiring connections as follows:
1. Press the Lights button to enable manual light control, and press the right side and the left side of each of
the function buttons to increase and decrease the lighting level of those loads. Verify that the intended loads
and corresponding LED bar graphs respond appropriately.
2. Press the OFF button to turn off all loads. The loads ramp down to off while the two-digit display counts
down to off (blank). Two seconds after all lights have turned off, the unit’s master air-gap relay opens
making it safe to service the lighting installations.
^
^
Scene 1 Scene 2 S cene 3 S c ene 4 Scene 5 Scene 6
^
^
M in
Sec
Ligh ts
Shade s
Save
C an cel
1 2 3 4 5 6
ON
OFF
LED
Bar Graphs
Two-Digit
Display
Function
Buttons
Lights
Button