Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
82 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
• Override is shared for all combined/uncombined rooms (when triggered
from master CLS-C6)
A CLS-C6 that is combined with another CLS-C6 that is, in turn, combined with a
third shall be considered combined with that third CLS-C6.
Example 1: Two Rooms
MASTER
SLAVE 1
GLS-SIM
Partition Sensor
ID: 90
Partition
Master/Slave 1
Example 2: Three Rooms
MASTER
SLAVE
1
ID: 90
SLAVE 2
ID: 98
M/S1 S1/S2
GLS-SIM
Partition
Master/Slave 1
Partition
Sensor
Partition
Slave 1/
Slave 2
GLS-SIM
Partition Sensor
Example 3: One Small and One Large Room
MASTER
SLAVE 1
ID: 90
SLAVE 2
M/
S1
GLS-SIM
Partition
Master/Slave
1
Partition Sensor
In example 3, above, since there are no partitions separating Slave 1 and Slave 2 or
Master and Slave 2, iLux Designer software must be used to indicate the default
status of these missing partitions. In this case, the following defaults should be set:
• Master/Slave 1 default can be set to either Open or Closed, as the
physical partition sensor determines the actual state anyway
• Master/Slave 2 default must be set to Closed since they are not directly
partitioned (we are assuming that Master and Slave 1 are separated by the
partition)
• Slave 1/Slave 2 default must be set to Open since they are physically
located in the same room and thus must always be combined
Refer to iLux Designer help for more details.