Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
80 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
FUNCTION
NAME
DUAL EXTERNAL FUNCTION (1/2 …31/32)
Behavior Activates the corresponding “press” digital signal (press1–
press32 on the External Functions slot) on the Cresnet
system connected to the CONTROL SYSTEM port. Signal
remains high for as long as the button is pressed.
The left button corresponds to the lower number. The right
button corresponds to the higher number.
LED On if feedback for either join number is high, off if feedback
for both join numbers is low.
Applies To Shifted Rocker
Rocker Behavior See “behavior” above
Notes Note that these should only be assigned to CLS-C6 unit that
is directly connected to Cresnet control system. If assigned
to unit that is connected to the local devices network of
another CLS-C6 unit, they do not function.
FUNCTION
NAME
SHIFT
Behavior If shift function is assigned to the up/down button in iLux
Designer, pressing this button alternates between lower and
upper functions for the six front panel function buttons
LED N/A
Applies To up/down
Rocker Behavior Top, bottom, and both all perform the same function
Notes N/A