Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M

78 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G

FUNCTION

NAME

JOG SHADES CLOSED (ALL, GROUP 1–6)

Behavior Specified shades move toward the Closed position for the

specified jog time, and then stop.

LED On while button is pressed

Applies To Remote Button

Rocker Behavior N/A

Notes Jog time defaults to 0.05 sec. Other values can be set in

iLux Designer.

Shade commands with “All” parameter only affects all the

shade groups connected to the given CLS-C6 module. They

do not pass from one CLS-C6 module to the other (either

when directly connected or when linked through Cresnet

system). To accomplish this function for all shades in a

multi-unit system, use SIMPL programming.

FUNCTION

NAME

OPEN MOMENTARY/OPEN FULL

(ALL, GROUP 1–6)

Behavior A quick tap of the button performs a “Full Open.” A

maintained press performs a “Momentary Open” until the

button is released.

If the shade is already moving in the open direction, a tap

stops it. If the button is tapped once, it starts moving to full

open; then if tapped again, it stops.

If the shade is moving in the close direction, a tap sends to

full open. A longer press performs a “Momentary Open” until

the button is released.

LED On while button is pressed

Applies To Remote Button

Rocker Behavior N/A

Notes When changing direction, there may be a short time when

the shade is stopped before it starts moving in the opposite

direction. This is the lockout time for the shade controllers.

This time is fixed for the C2N-SSC shades; it can be