Specifications

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux Integrated Lighting System
Operations Guide – DOC. 6347G iLux Integrated Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 77
FUNCTION
NAME
OPEN SHADES MOMENTARY (ALL, GROUP 1–6)
Behavior Specified shades move toward the Open position for as long
as the button is pressed. Movement stops when button is
released.
LED On while button is pressed
Applies To Remote Button
Rocker Behavior N/A
Notes Shade commands with “All” parameter only affect all the
shade groups connected to the given CLS-C6 module. They
do not pass from one CLS-C6 module to the other (either
when directly connected or when linked through Cresnet
system). To accomplish this function for all shades in a
multi-unit system, use SIMPL programming.
FUNCTION
NAME
CLOSE SHADES MOMENTARY (ALL, GROUP 1–6)
Behavior Specified shades move toward the Closed position for as
long as the button is pressed. Movement stops when button
is released.
LED On while button is pressed
Applies To Remote Button
Rocker Behavior N/A
Notes Shade commands with “All” parameter only affect all the
shade groups connected to the given CLS-C6 module. They
do not pass from one CLS-C6 module to the other (either
when directly connected or when linked through Cresnet
system). To accomplish this function for all shades in a
multi-unit system, use SIMPL programming.
FUNCTION
NAME
JOG SHADES OPEN (ALL, GROUP 1–6)
Behavior Specified shades move toward the Open position for the
specified jog time, and then stop.
LED On while button is pressed
Applies To Remote Button
Rocker Behavior N/A
Notes Jog time defaults to 0.05 sec. Other values can be set in
iLux Designer.
Shade commands with “All” parameter only affects all the
shade groups connected to the given CLS-C6 module. They
do not pass from one CLS-C6 module to the other (either
when directly connected or when linked through Cresnet
system). To accomplish this function for all shades in a
multi-unit system, use SIMPL programming.