Specifications

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux Integrated Lighting System
Operations Guide – DOC. 6347G iLux Integrated Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 69
Photocell Commands
Photocell Operation
Commands
Photocell Enable Command
The following command is used to query photocell active state:
Syntax: [ILUX] PH [X|ALL] ACTIVE ?
X = 16 light zone
Reply packet:
[ILUX] PH [X] ACTIVE [STATE]
STATE = ON/OFF
[ILUX] PH [ALL] ACTIVE [STATE1][….][STATE6]
Version Command
The following command is used to query version string. This command is not
supported for slave CLS-C6 devices.
Syntax: M VER ?
Reply packet:
M VER CLS-C6M TEST VER [v2.01.02, #12345678]