Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
68 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
Override Status Command
The following command reads the override status.
Syntax: [ILUX] OV ?
Reply packet:
[ILUX] [OV] [STATE]
STATE = ON/OFF Override On/Override Off
Load Shed Commands
Load Shed Mode
Load Shed On Command
The following command is used to turn on load shed:
Syntax: [ILUX] LS ON
Load Shed Off Command
The following command is used to turn off load shed:
Syntax: [ILUX] LS OFF
Load Shed Status Command
The following command reads the load shed status:
Syntax: [ILUX] LS ?
Reply packet:
[ILUX] [LS] [STATE]
STATE = ON/OFF Load shed on/Load shed off
Occupancy Commands
Occupancy Operation
Commands
Occupancy State Set/Clear Command
The following command is used to set or clear occupancy state. All occupancy
sources are ORED together. Command not supported for slave iLux. If master and
slave iLux(es) are linked, the occupancy state is forwarded to all iLux units:
Syntax: M OC [SET|CLEAR]
Occupancy State Query Command
The following command is used to query occupancy state:
Syntax: [ILUX] OC ?
Reply packet:
[ILUX] OC [STATE]
STATE = OCCUPIED/UNOCCUPIED