Specifications

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux Integrated Lighting System
Operations Guide – DOC. 6347G iLux Integrated Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 67
Scene Name Query Command
The following command is used to query scene name:
Syntax: [ILUX] SC [XX] NAME ?
XX = OFF, ON, 1–15 Scenes
Reply packet:
[ILUX] SC [XX] NAME [LABEL]
LABEL=Scene name
Room Combining Commands
Combine Rooms
This command is used to combine room controllers. This command is not supported
for slave CLS-C6 devices.
Syntax: M COMBINE [ILUX1] [ILUX2]
ILUXx = M for master, S1–S8 for slaves
Un-combine Rooms
This command is used to un-combine room controllers. This command is not
supported for slave CLS-C6 devices.
Syntax: M UNCOMBINE [ILUX1] [ILUX2]
ILUXx = M for master, S1–S8 for slaves
Query Combine Status
This command is used to query room combine status. This command is not
supported for slave CLS-C6 devices.
Syntax: M COMBINE [ILUX1] [ILUX2]?
Reply packet:
M COMBINE [STATUS]
[STATUS] = YES/NO
Override Commands
Override Mode
Override On Command
The following command is used to turn on override:
Syntax: [ILUX] OV ON
Override Off Command
The following command is used to turn off override:
Syntax: [ILUX] OV OFF