Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
66 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
Scene Query Shade Group Level Command
This command is used to read shade level in scenes. This command is not supported
for slave CLS-C6 devices.
Syntax: M SC [XX] SZLVL ?
XX = OFF, ON, 1–15 (Scenes)
Reply packet:
M SC [XX] SZLVL [LEVEL1] [….] [LEVEL6]
LEVELx = 0–100 for shade zone1 through shade zone6
Scene Light Add/Remove Mask Command
This command is used to remove or add light zones to scenes. This command is not
supported for slave CLS-C6 devices.
Syntax: M SC [XX] LZMSK [VALUE]
XX= OFF, ON, 1–15 (scene)
VALUE=0...63 (1=Add, 0=Remove)
(bit0–bit5=Light zone 1–Light Zone6)
Scene Light Mask Status Command
This command is used to read light mask in scenes. This command is not supported
for slave CLS-C6 devices.
Syntax: M SC [XX] LZMSK ?
XX= OFF, ON, 1–15 (Scenes)
Reply packet:
M SC [XX] LZMSK [VALUE]
Scene Shade Mask Command
This command is used to remove or add shade group to scenes. This command is not
supported for slave CLS-C6 devices.
Syntax: M SC [XX] SZMSK [VALUE]
XX=OFF, ON, 1–15 (scene)
VALUE=0–63 (1=Add, 0=Remove)
(bit0–bit5=Shade group 1–Shade group6)
Scene Shade Status Command
This command is used to read shade group mask in scenes. Command is not
supported for slave iLux.
Syntax: M SC [XX] SZMSK ?
XX= OFF, ON, 1–15 (Scenes)
Reply packet:
M SC [XX] SZMSK [VALUE]