Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
64 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
X=1–6 Shade group
Reply packet:
[ILUX] SZ [X] NAME [LABEL]
LABEL = Shade zone name
[ILUX] SZ ALL NAME [LABEL1], […], [LABEL6]
LABELx = Shade group names separated by comma
Shade Type Query Command
The following command is used to query shade type. Command is not supported for
slave CLS-C6 devices.
Syntax: M SZ [X|ALL] TYPE ?
X = 1–6 Shade group
Reply packet:
M SZ [X|ALL] TYPE [CODE1] […] [CODE6]
CODEx = Shade types codes for shade group 1–6
Shade Type Codes
CODE SHADE TYPES
20 Somfy shade controller
21 C2N-SDC 4 relay shade controller
22 C2N-SDC-DC shade controller
Scene Commands
Scene Operating Commands
Scene Recall
The following command is used to recall a scene:
Syntax: [ILUX] SC [XX] RECALL
Recall Scene Commands
SCENE NUMBER (XX) DESCRIPTION
ON
On Scene
OFF
Off Scene
1–15
Scene 1–15
Scene Raise, Lower, and Stop Command
The following command is used to raise, lower, or stop the scene light zone levels
which can use a scene fade time:
Syntax: [ILUX] SC [XX] [UP|DN|STOP]
XX = OFF, ON, 1–15 Scenes
UP = Raise, DN = Lower, STOP = Stop scene raise/lower