Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
2 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
Features and Functions
(Continued)
Six Channel Dimming
The CLS-C6 features six channels of dimming for LED*, incandescent, magnetic
low-voltage, neon/cold cathode, and 2-wire dimmable fluorescent loads. On/off
switching of many non-dimmable lighting loads is also possible. Each channel
handles up to 800 watts individually, with a total rating of 1920 watts at 120 Vac for
CLS-C6/C6M (2300 watts at 230 Vac for CLSI-C6/C6M). Larger loads and
additional load types can also be supported using Crestron CLS-EXP Series
expansion modules (sold separately).
Six Group Shade Control
Using Crestron's networked shade and drapery controllers, the CLS-C6 enables
versatile control of a roomful of motorized window treatments, screens, and lifts in
up to six shade groups.
Energy Management
Using Crestron Green Light
®
technology, the iLux line of integrated lighting systems
allows for the management of demand response for load shedding and room
occupancy sensing for maximum energy efficiency and cost savings.
Versatile Front Panel Controls
The deceptively clean front panel actually affords an extensive amount of control
and customization to suit each unique room application. Large ON and OFF buttons
provide instant access to the On and All Off scenes, while the six main buttons can
be set up to recall additional scene presets, adjust shades, or perform a host of other
functions. The buttons' rocker action enables intuitive, tactile control for adjusting
lighting levels and shade positions. An additional up/down button is configurable for
a variety of functions, including use as a master lighting control, shade control, or
shift button to expand the capabilities of the six main buttons.
With each new scene selection, window shades reposition and lights fade elegantly
to their new settings. The selected scene is indicated by a white LED beside each
button and the customizable label strip allows each button to be clearly labeled using
Crestron Engraver software or standard 3/8 inches tape labels. Dimming levels and
shade positions are displayed graphically on six green LED bar graphs accessible
behind the flip-up front cover. Additional controls and a numeric display hidden
beneath the cover enable setup without requiring a PC. Enhanced customization is
provided via the PC programming port using iLux Designer software.
* For a list of compatible ballasts, visit www.crestron.com/lightingcompatibility.
• Energy saving ASHRAE 90.1/LEEDS compliant
• Available in almond, black, or white
• Supports daylight harvesting
• RS-232 interface via C2N-IO (sold separately)