Specifications

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux Integrated Lighting System
Operations Guide – DOC. 6347G iLux Integrated Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 55
SYSTEM*
Description: Use this command to load firmware to the CLS-C6.
Help Menu(s): File
Syntax:
SYSTEM
Parameters: None
UPLOAD*
Description: Use this command to load firmware to the slave device on the local network.
Help Menu(s): File
Syntax:
UPLOAD [ID] FIRMWARE
Parameters:
[03…FE]
FIRMWARE
is the only valid value for this parameter
VERSION
Description: Use this command to display the firmware version number. For example, this command
would produce information similar to the following:
CLS-C6M Lighting Controller with Motion
[v1.00.04, #FFFD6899]
Help Menu(s): Common
Syntax:
VERSION
Parameters: None
WHITELEDLEVEL
Description:
Use this command to
display or set white LEDs brightness level. Refer to “LED Brightness”
on page 26 for details.
Help Menu(s):
Device
Syntax:
WHITELEDLEVEL [nnn]
WHITELEDLEVEL
Parameters:
[
0…100] to set brightness level
N
one to display current brightness level
WHITELEDGLOWLEVEL
Description:
Use this command to display or set white LEDs glow brightness level. Refer to “
Glow Mode
Brightness
” on page 27 for details.
Help Menu(s):
Device
Syntax:
WHITELEDGLOWLEVEL
[nnn]
WHITELEDGLOWLEVEL
Parameters:
[
0…100] to set glow level
N
one to display current glow level
* This function is typically done using Crestron Toolbox or iLux Designer menu commands.