Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
54 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
MOTIONSENSORLEVEL
Description:
Use this command to display and change the internal motion sensor sensitivity
level.*
Help Menu(s):
Device
Syntax:
MOTIONSENSORLEVEL
Parameters:
Higher values make
motion sensor less sensitive. Default is 78; valid range is
[0…255]
PROJECTINFO
Description: Use this command to display the project file name, the date and time it was compiled,
version and change flags. For example, this command would produce information similar to
the following:
Project file name : Conference Room.ilx
Date : 9/9/05
Time : 3:13:21 PM
Config data version : 1.1
User data version : 1.0
Change flags : 00000000
Help Menu(s): Device
Syntax:
PROJECTINFO
Parameters: None
PUTCONFIG*
Description: Use this command to load the project file to the CLS-C6
Help Menu(s): File
Syntax:
PUTCONFIG PROJECT
Parameters:
PROJECT
is the only valid parameter value
REBOOT
Description: Use this command to reboot the CLS-C6
Help Menu(s): Common
Syntax:
REBOOT
Parameters: None
REPORTCRESNET
Description:
Use this command to report devices on the local network
Help Menu(s):
Common
Syntax:
REPORTCRESNET
[ID]
REPORTCRESNET ALL
Parameters:
[
03…FE] to identify a specific device
ALL
to show all devices on the network
RESTORE
Description: Use this command to set all project configuration and parameters to the factory default
settings.
Help Menu(s): System
Syntax:
RESTORE ALL
Parameters:
ALL
is the only valid value for this parameter