Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M
52 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G
Appendix B: Console Commands
Console commands are available through the Crestron Toolbox program.
1. Select Text Console from the Tools menu.
2. At the prompt, enter HELP ALL and press Return. The system displays the
following:
iLux>HELP ALL
? display list of common commands
CNETID display or set the cresnet id
GETCONFIG get project file from iLux
GREENLEDLEVEL display or set the green leds brightness
level
HELP display list of available categories
INFO display additional device information
IR display or enable/disable IR reception
MOTIONSENSORLEVEL display/change the internal motion sensor
level threshold
PROJECTINFO display detailed project file information
PUTCONFIG load project file to iLux
REBOOT reboot the iLux
REPORTCRESNET show all devices on the local network
RESTORE set all parameters to factory default
SYSTEM load firmware to iLux
UPLOAD load firmware to cresnet device on the local
network
VERSION display firmware version number
WHITELEDLEVEL display or set white leds brightness level
WHITELEDGLOWLEVEL display or set white leds glow brightness
level
iLux>
The commands are presented alphabetically below. Details about each command
include a description of the command, a list of help menus that contain the
command, the proper syntax for entering the command, and definitions of parameters
that may be included in the syntax. Note that console commands are case insensitive.
?
Description: This command produces a list of the most used common commands.
Help Menu(s): Main, Common
Syntax:
?
Parameters: None
CNETID
Description: Use this command to set or display the Cresnet ID of the CLS-C6 as a slave device.
Help Menu(s): System, Common
Syntax:
CNETID [ID]
CNETID
Parameters:
[03…FE] to set the ID
None to display the current ID