Specifications

Crestron CLS/CLSI-C6 & CLS/CLSI-C6M iLux Integrated Lighting System
Operations Guide – DOC. 6347G iLux Integrated Lighting System: CLS/CLSI-C6 & CLS/CLSI-C6M • 11
Setup
Network Wiring
When wiring the Cresnet network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or damage
to the equipment. Use the Crestron Power Calculator to help calculate how
much power is needed for the system (
www.crestron.com/calculators).
For Cresnet networks with 20 or more devices, use a Cresnet Hub/Repeater
(CNXHUB) to maintain signal quality.
For more details, refer to “Check Network Wiring” on page 39.
Net ID
NOTE: The latest software can be downloaded at www.crestron.com/software.
The Net ID of the CLS-C6 has been factory set to 1F. The Net IDs of multiple
CLS-C6 devices in the same system must be unique. Net IDs are changed from a
personal computer (PC) via Crestron Toolbox™ (refer to “Establishing
Communication” on page 29).
When setting the Net ID, consider the following:
• The Net ID of each unit must match an ID code specified in the Crestron
Studio™ or SIMPL Windows program.
• Each network device must have a unique Net ID.
For more details, refer to the Crestron Toolbox help file.
Installation
For detailed installation procedures, refer to the CLS-C6/C6M iLux Lighting
Systems Installation Guide (Doc. 6394) and CLSI-C6/C6M iLux Lighting Systems
Installation Guide (Doc. 6413).