Specifications

iLux Integrated Lighting System Crestron CLS/CLSI-C6 & CLS/CLSI-C6M

10 • iLux Integrated Lighting System: CLS-C6/C6M & CLSI-C6/C6M Operations Guide – DOC. 6347G

Connectors, Controls, and Indicators (Continued)

# CONNECTORS

CONTROLS, AND

INDICATORS

DESCRIPTION

16 LOAD1–LOAD6 Use these terminals to connect the CLS-C6

dimmer channel outputs to the appropriate

lighting loads.

17 HOT, NEUTRAL,

(Ground)

Use these terminals to connect the unit to the

120 V (CLS-C6/M) or 230 V (CLSI-C6/M)

power source.

CONTROL SYSTEM

G Z Y 24

Use this 4-pin terminal block to connect the

CLS-C6, using standard Cresnet wiring, to a

2-Series control system network. In this

configuration, the CLS-C6 acts as a standard

Cresnet slave device. (The CLS-C6 does not

draw power from Cresnet.).

19 LOCAL DEVICES

G Z Y 24

Use this 4-pin terminal block to connect the

CLS-C6, using standard Cresnet wiring, to

local devices. In this configuration, the

CLS-C6 acts as the Cresnet Master.

* Interface connectors for CONTROL SYSTEM and LOCAL DEVICES ports are provided with the

unit.