Specifications

ww w.c restro n. eu

® 2007 Crestron Electronics, Inc. Specifications subject to change.

Please contact Crestron International for specific availability.

Accessories

CSP-RS232I RS-232 Isolator

The CSP-RS232I is an accessory designed to protect Crestron RS-232

COM ports from lightning strikes. It provides isolation between the control

system and outdoor devices such pool & spa controllers or irrigation sys-

tems, preventing damage to the control system from lightning surges as

well as ground-loops, shorts, and voltage differentials.

 Isolates lengthy or outdoor RS-232 cable runs

 Protects control systems from lightning strikes

 Supports RS-232 up to 115.2k baud

 Supports hardware handshaking

 4.5 Kilovolt RMS galvanic isolation

Setting up Crestron's new Adagio Media System (AMS) to deliver the highest

possible sound quality is a breeze using the CSSTK Surround Sound Tuning

Kit. Featuring Audyssey MultEQ

XT technology, the AMS facilitates an

optimum listening experience at every seat using an ingenious equalization

solution that corrects for both time and frequency response problems. MultEQ

XT is the only technology of its kind capable of properly measuring sound

response throughout the listening area, and combining that information to

accurately represent the acoustical intricacies of the room. Based on these

measurements, MultEQ XT meticulously calculates an equalization solution

that effectively minimizes response distortion at every listening position.

The CSSTK provides the hardware necessary for setting up the audio

equalization in the AMS. It includes a professional calibrated microphone,

boom stand, and a selection of USB and mic cables. Complete setup utilizes a

computer running Crestron Pro Sound Tools or Crestron Toolbox™

software.

CSSTK Surround Sound Tuning Kit

BAR-1 Balanced Audio Receiver

The ABAR-1 is an active balanced-to-unbalanced audio converter designed to

enable the connection of any Crestron Home

CAT5 Balanced Audio source to

a conventional unbalanced stereo line-level input. Connected at the input of an

Adagio system or CNX-PAD8A audio distribution processor, the ABAR-1 allows

a CEN-IDOC Interface for Apple iPod

to be installed up to 500 feet from the

central equipment location. A single CAT5e type cable is all that is required

between the CEN-IDOC and ABAR-1.

 CAT5 balanced to RCA unbalanced audio converter

 Designed for CEN-IDOC and other Crestron Home CAT5 Balanced

Audio sources

 Compatible with Adagio home entertainment systems, CNX-PAD8A,

and conventional AV receivers