Specifications

ww w.c restro n. eu
® 2007 Crestron Electronics, Inc. Specifications subject to change.
Please contact Crestron International for specific availability.
50
European Modules
 DIN- rail mountable 12 channel analog output
module
 12 channels 0-10V (MAX15mA/output) to
control SP4/SP12 or third party dimmers
 RoHS compliant
 Takes 5 DIN spaces on DIN rail
 LED feedback/ channel
 Manual emergency override troughcontact of
switch to drive all outputs to 100%
 DIN- rail mountable 4 channel analog output
module
 4 channels 1-10V to control dimmable ballasts
 Each output max 25mA with total of 100 mA
 4 High voltage cut-off relays on board
(16A/250V)
 RoHS compliant
 Takes 9 DIN spaces on DIN rail
 LED feedback/ channel and relay
 Manual emergency override
CH-HRMOT2-D9
 DIN- rail mountable motor control module
 Controls 2 motors 230V / 10A
 Uses Solid state relays
 RoHS compliant
 Takes 9 DIN spaces on DIN rail
 LED feedback/ relay
 Manual emergency override for motor 1
and/ or motor 2
 Can also be used to switch 4 independant
inductive loads…
CH-AO12-D5
CH-DIM4-D9
 DIN- rail mountable 8 channel relay module
 8 independent relays 16A/250V to switch
resistive loads
 RoHS compliant
 Takes 6 DIN spaces on DIN rail
 LED feedback/ relay
 Manual emergency override / relay
CH-HREL8-D6
CH-IN8-D5
 DIN- rail mountable 8 input module
 8 inputs up to 24 Volts AC/DC from swiches,
third party output contacts…
 RoHS compliant
 Takes 5 DIN spaces on DIN rail
 LED feedback/ input
 DIN- rail mountable 4 channel dimmer
 4 channel dimmer 570W / channel
 Channels 2 by 2 bridgeable to create a 2
channel 1140W dimmer
 RoHS compliant
 LED feedback/ channel
 Manual override to drive all channels to 100%
CH-PD4x570
CH-HRIO8-D9
 DIN- rail mountable input + relay module
 8 independent relays 16A/250V to switch
resistive loads
 8 inputs up to 24 Volts AC/DC from swiches,
third party output contacts…
 RoHS compliant
 Takes 9 DIN spaces on DIN rail
 LED feedback/ relay and input
 Manual emergency override / relay
CH-TEMP-O
 Cresnet network temperature sensor
 Compact design
 Reports to cresnet
 RoHS compliant
CI-BO1
 Serial bi-directional gateway to Bang&Olufsen
One master link
 One power link

1 IR output with 1.5ms pulse wide
 1 IR input for Bang & Olufsen IR receiver with
1.5ms pulse wide
 1 IR output modulateded 200us designed for
driving IR emitting diode
 4 CI-BO1 can be daisy chained on 1 Crestron
serial port
CH-TEMP-WM
 Wall mountable temperature sensor
 To be used with square or round European
backbox
 Blue LED (can be switched off)
 Reports to cresnet
 RoHS compliant