Specifications

ww w.c restro n. eu
® 2007 Crestron Electronics, Inc. Specifications subject to change.
Please contact Crestron International for specific availability.
Audio & Video Solutions
Audio Processor
43
 Professional quality volume control, equalization,
and signal routing
 24-bit 96KHz A/D and D/A converters
 4 balanced/unbalanced line-level I/O channels
 Dynamically adjustable 4 x 4 matrix mixer
 Independent volume, bass, treble, and mute
per channel
 12-band parametric or graphic equalization
per channel
 Output relays for silent muting and
“thump” prevention
 Configuration presets and real-time
control with true-feedback
 Complete setup using Digital Media Tools software
 Cresnet communications
 1/2-space rack-mountable
 Y-bus control card version available
C2N-VEQ4
Cresnet 4-Channel
V
olume/Equalizer Module
 CAT5 balanced video distribution to 8 rooms
 Combinable to support up to 32 rooms
 Variable input configurations:

16 inputs – component/S-Video/composite

24 inputs – 8 composite, 8 S-Video/composite,
8 component/S-Video/composite

32 inputs – 16 composite,
16 S-Video/composite
 Supports 1080i HDTV up to 500 feet over CAT5e
 16 coaxial digital audio inputs
(CNX-PVID8X4 only)
 Built-in video signal sensing on every input
 8x3 or 8x4 RCA outputs included for
conventional applications
 Fully configurable in SystemBuilder software
 Cresnet communications with any 2-Series
control system
CNX-PVID8X3
CNX-PVID8X4
Video Distribution Switchers
CNX-PVID8X3
 A single-box CAT5 audio & video receiver and
control interface
 Composite, S-Video, and HDTV/component outputs
 Digital audio output (requires CNX-PVID8X4)
 Up to 4 video and 3 stereo audio inputs for local
AV sources
 Integrated stereo preamp to drive amplified
TV speakers or separate amp
 CAT5 balanced audio and video return outputs
to share local sources with other rooms
 Separate record output
 Built-in video signal sensing
 1) RS-232 and 4) IR control ports
 Optional current sensor
 Optional IR remote receiver
 Single-cable hookup using CresCAT-Q wire
 Supports 1080i HDTV up to 500 feet
 Adjustable video compensation
CNXRMCLV
Enhanced Room Solution Box
CNX-PBVR4
CAT5 Balanced Video Receiver
 For use with one or more CNX-PVID’s
 Enables redistribution of return signals from
room solution boxes
 Supports up to 4 CAT5 balanced return feeds
 Adjustable video compensation
 A single-box CAT5 video receiver and control
interface for one video monitor
 Composite, S-Video, and HDTV/component outputs
 Digital audio output (requires CNX-PVID8X4)
 1) RS-232 and 4) IR control ports
 Optional current sensor
 Optional IR remote receiver
 Single-cable hookup using CresCAT wire
 Supports 1080i HDTV up to 500 feet
 Adjustable video compensation
CNXRMC
Room Solution Box
Camera Control
 Tactile pan-tilt-zoom camera and lens control
 Ergonomic 3-axis joystick – twist the knob to
zoom in and out
 Integral thumb triggers for high/low speed selection
 Encoder wheel and LED display for lens and
speed adjustment
 Programmable buttons w/LED feedback
for camera/preset select
 Cresnet network communications
C2N-CAMI-DJ
Digital Joystick Camera
Controller
 Universal pan/tilt for cameras and lenses up to 15 lbs
 Digital servo technology – Ultra fast, quiet,
and precise
 354° pan and 180° tilt
|
60° per second
pan/tilt speed
 ±3 arc minutes repeatability
 Bidirectional RS-232 camera control port
 Analog, servomotor and double hot shoe lens control
 100 onboard user presets
 Cresnet network communications
C2N-CAMI-DSPT
Digital Servo Pan/Tilt Head
Video Distribution